The docking station is used for connection between SMT production lines, and can also be manually buffered by PCB buffering, inspection, testing or electronic components. Applicable to PCB board with a width of 50mm-500mm

Precautions:

Check before power on:

1. Check the supply power cord for damage.

2. Check if the equipment is well grounded.

3. Check if the control button is reset.

4. Check if the width of the guide rail is appropriate.

5. Check if the belt is loose.

6, the above no abnormalities can be started to prepare for operation.

Operation sequence:

Control panel description:

The FINISH button does not have a self-locking button. Each press indicates that the check is completed.

The PCB board passes and continues to run.

The PASS/CHECK button is not pressed.

PASS PCB board does not need to be checked, it passes automatically; press

CHECK indicates that the PCB board needs manual inspection and needs to be used with FINISH.

POWER is the power switch and is energized.

LIGHT is the light switch.

Precautions:

1. Ensure that there are no foreign objects in the transport part, belts, pulleys and transport guides to ensure smooth and smooth transportation.

2. Regularly refuel the transmission part and the rack or the widening screw. The refueling must be performed in the stop state.

3. In case of power failure, immediately turn off the main power switch of the equipment.

【Back】