Fujikura Xiongtai Technology Industrial Aluminum Profiles - How to prevent the hardness of industrial aluminum profiles from being too low?

1. Setting and control of aluminum profile temperature: Generally, there is a certain error between temperature and display temperature. When setting the table temperature, it should be set according to the actual temperature of the furnace, and pay close attention to the temperature fluctuation.

2, aluminum profile aging insulation: rigorously in accordance with the process requirements for aging, insulation time should be appropriate to prevent under-aging or over-aging, resulting in insufficient hardness. Blanking frame, loading furnace

3. The extrusion frame of aluminum profile should not be too dense. There should be a gap between the material and the material. The aluminum profile, especially the non-ventilated small material and thick material interval, should be larger. The pipe material is combined with the small material and the plate material. When the frame is placed, the pipe material is placed below to facilitate the aging cycle to supply air.

4. Before the furnace is installed in the aluminum profile, the other special alloys of 6xxx should be separated from the ordinary 6063 alloys. Because of the production reasons, it is necessary to use the special alloy process for aging.

Summary: Regarding the low hardness of industrial aluminum profiles, Fujikura Xiongtai introduced you here. I would like to know about the price of industrial aluminum profiles, industrial aluminum profiles, aluminum profiles, aluminum profiles and other related products. Our official website: www.sztps668.com Company address: Building C1, Fujiarui Science and Technology Park, Songgang Road, Songgang Town, Bao'an District, Shenzhen, China Tel: 0755-2739 9896 Fax: 0755-2739 9686

【Back】